The garnet water knife sand for the cutting of the water knife
There are many names of water knife sand, such as: water knife cut sand, special sand for water knife, special sand for water knife machine, pomegranate sand, pomegranate sand, Class A water knife sand, first -class water knife sand, universal water knife cutting Machine sand, etc., the main uses are 60 meters, 80 meters and 120 meters.
Product model: 60# (0.212-0.5mm), product use: stone, rubber, wood. The cutting effect: suitable for high -speed cutting occasions, which can improve the cutting speed by 30%, but the cost is to reduce the precision of the cutting surface
Product model: 80# (0.15-0.355mm), product use: carbon steel, stainless steel, aluminum, titanium. Cutting effect: Z is a commonly used water knife cutting abrasive particle size, which can achieve perfect balance in terms of cutting speed and cutting accuracy.
Product model: 120# (0.1-0.2mm). Products: glass, semiconductor. Cutting effect: Meeting the requirements of high precision and cutting surface tolerance.
The cutting surface can be divided into 5 levels. When cutting a thinner material, the cutting time required to reach the 5 -level cutting surface is generally 3 times that of the first -level cutting surface. However, when cutting thick hard materials, it takes nearly 6 times the time to reach the first -level cutting surface. For example, when cutting 10cm thick aluminum plates, if you only need to achieve the five -level cutting surface effect, the cutting speed is about 4.2IPM (107mm/min). 0.72IPM (18mm/min). In addition, because garnet water knife sand is a natural mineral, the hardness of the hardness produced in different regions will also be largely different. The diligence of the processing process of the water knife and sand manufacturer considers is uneven. The quality of quality is obvious. Inferior water knife sand will seriously reduce the cutting efficiency, which leads to the increase in time cost, which greatly reduces you