Customers often ask: Can the waterjet sand used for waterjet cutting be reused? Chaowei New Material will answer common questions in waterjet cutting for you.
1. Do I need to punch holes when using waterjet cutting tools? ?
The water jet does not need to drill in advance when cutting, the water jet will directly cut the tool according to the figure.
2. What is the hourly cost of cutting with a water jet? ?
The consumables for waterjet cutting are all very cheap materials, so the cost of using waterjet cutting for an hour is about 50 yuan without counting labor.
3. What is the water quality requirement for waterjet cutting? ?
Waterjet cutting has very low requirements for water quality. Generally, as long as there is no impurities, it is best to use civilian tap water.
4. Can the water after waterjet cutting be used again? ?
When the water jet cuts the workpiece, it will bring the cut pieces of the workpiece into the water. If sand is needed for cutting, the cut sand will also be brought into the water. If it is to be reused, it needs to be filtered, which will increase it. Cost.
5. Can people approach when the waterjet is running? ?
During the operation of the water jet, the power of the high-pressure water jet is very large, so the operator must keep a certain distance to avoid accidental injury.
6. Can waterjet cut tempered glass? ?
Tempered glass itself cannot be cut, and neither can waterjet
7. Is it difficult to operate the water jet? ?
The operation of the waterjet is very simple, as long as the image is designed with CAD, the waterjet can be cut
8. Can the garnet sand used by waterjet be used repeatedly? ?
The edges and corners of the used garnet sand will be smoothed during the waterjet cutting process, and it will be of no use to reuse it